A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

90% Airlume combed and ring-spun cotton, 10% poly
Sleeve print detail

90% Airlume combed and ring-spun cotton 10% poly
water-based print for soft feel
tailored fit with longer torso

10 oz (330 gm) cotton/polyester blend
70% cotton/30% polyester
Ringspun cotton
Fleece lined hood
Nickel eyelets
Generous fit

A lightweight raglan sweater with tonal gloss chest print. Slim Fit with Cinema embroidered tag

Cinema Capital C Hat

Unstructured 5-panel hat with a low-profile fit and plastic snapback.
One Size Fits All
100% Cotton Twill

Acrylic material
Cinema logo fold over tag
Colors:Black, Kahki
Sizes: Standard Fit

Everything you'd want in a headset! The Lift Kit comes with 5mm 10mm and 20mm rise headset caps giving your bike a super clean look and eliminating the need for additional spacers. Featuring two precision sealed campy spec bearings the Cinema Lift Kit provides long lasting bearing life and smooth function.

The Martinez stem is inspired by classic looking top load stems, with key improvements in strength and geometry. A 48mm reach gives a responsive feel, while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Beveled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved

The Cinema Sync half-link chain offers complete adjustability without needing an additional link and the curved side plates reduce the chances of a broken chain caused by links being caught during missed grinds. Forged pins further increase the chain’s strength and the Teflon coating reduces friction and wear on both the chain and sprocket. Debossed Cinema logos on each link finish off the overall design and the pre-inserted connector pin makes for easy installation. Compatible with 8t drivers and up.

Timeless styling is what the Waxed Canvas Stealth seat is designed around. A durable waxed canvas main panel with tonal embroidered Cinema logo is coupled with a color-matched faux leather rear panel and finished with contrasting Cinema red stitching and an embroidered folded seam tag. Available in black or brown to perfectly complement any setup.

The Painted Stealth seat features a full-wrap sublimated photo and graphic print on heavy weight canvas material for increased tear resistance. Finished with a custom embroidered Cinema patch and extra thick foam padding the Painted Stealth seat adds some pop to top off your kit.

The Static Stealth seat is a trip for the eyes and adds a righteous splash of color to any setup. The seat is designed around a full-wrap sublimated static camo print on heavy weight canvas material for increased tear resistance and is finished with an embroidered Cinema seam tag. The patented Stealth technology allows for a seamless visual canvas and the extra thick padding keeps things cushy when you need it.

Featuring the latest Stealth system design, the Cinema Stealth seat post is as simple and clean as it gets. The standard 25.4mm diameter fits all BMX frames, and the 3D forged 6061-T6 aluminum creates a super strong design. Works with both Stealth and traditional Pivotal seats.

Featuring the latest Stealth system design, the Cinema Stealth seat post is as simple and clean as it gets. The standard 25.4mm diameter fits all BMX frames, and the 3D forged 6061-T6 aluminum creates a super strong design. Works with both Stealth and traditional Pivotal seats.

Chad Kerley’s signature CK pedals feature a comfortable concave body design, with 12 molded pins per side and micro knurling across the entire surface for added traction. The pedal bodies are injection molded from a tough nylon fiberglass blend, spinning on a durable full chromoly spindle. Embossed end caps feature the CK signature logo, and feature a unique removal slot should the pedal need to be tightened or greased.

The C4 peg consists of a lightweight 6061-T6 aluminum core with a durable and replaceable 4.33” long nylon sleeve allowing for smooth grinds on the roughest of ledges. Sold individually as a 14mm peg with a 10mm adapter.

The signature Dak pegs feature a super strong chromoly core and a long-lasting nylon sleeve, for smooth grinds on the roughest ledges and rails. The exclusive cog design increases the cores end thickness making this peg even stronger than traditional plastic pegs, while preventing the peg sleeve from rotating at the same time. With Dakota Roche’s name on it, you know they can take a beating! Sold individually as a 14mm peg with a 3/8″ adapter.

The 4140 peg is a 100% heat treated 4" 4140 chromoly peg made for the streets. Internally butted and externally relieved to save weight.

The S45 peg is a 4.5” long, heat treated SCM415 chromoly steel peg, with internal butting and external reliefs to reduce weight without sacrificing strength. The forging process makes the S45 super strong and lasting, and the final CNC machining keeps the weight down and creates a smooth finish. Sold individually, 14mm and includes 10mm (3/8”) adapter.

4.33” long nylon replacement sleeve for the C4 peg.

Replacement nylon sleeve for the Cinema Dak peg, sold individually.

Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI’s superior rubber material. The flangeless design features a generous 160mm (6.3”) width and super comfortable 30.5mm (1.2”) diameter. Thin mushroom style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip, while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug style barends.

The Williams tire combines the best of both worlds, with a smooth continuous centerline tread that rolls super-fast and super grippy micro-knurling across the side treads. The 2.5” width adds stability and softens hard landings, while still fitting in most modern frames. Nathan Williams tested and approved.

Premium rubber 20x2.1"-2.45" inner tube.

Knurled 6061 aluminum valve caps for a little touch of swag.

The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the Cinema CF nylon hub guards (included). The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm chromoly inner axle provides plenty of strength for all the grinds you can throw at it.

The VX2 is a high quality, sealed front hub with a super strong 15mm SUJ-2 steel inner axle and a 6061 aluminum hub shell with thick angled flanges to eliminate bearing seat stretch. Combined with the Cinema VX2 front hub guards, this hub can take a serious beating. Now includes 2 hub guards!

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.

The team favorite, FX freecoaster hub. Features KHE based internals, a 9t sealed bearing driver, and a super strong heat treated 14mm axle with 6mm internal hex. Paired with the FX rear hub guard, this hub is a beast! Includes 3 slack adjustment washers for fine tuning. Now includes 2 hub guards!

The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9t dual sealed bearing driver with additional bushing, and a super strong heat-treated chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.

Cinema VX2 Front Hub Guard

Designed specifically for the non-drive side, the CR rear hub guard presses directly over existing Cinema hub hardware to protect your hub and spokes. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable and easily replaceable. Compatible with 2018 Cinema VX2 cassette, 2018 Cinema FX freecoaster, 2018 Cinema ZX cassette and Kink East Coaster freecoaster.

The Cinema VF (uniVersal Front) hub guard is injection molded from an ultra-durable and fast sliding nylon composite. Designed to work with as many different front hub and fork combinations as possible, the VF guard covers one or both sides of your hub and fork dropout to protect them during grinds. Simply install outside the fork dropout, without replacing any hub hardware and without spacing out your forks.

The ZX front hub guard threads directly on the axle, replacing the existing cone hardware. Machined from 7075-T6 aluminum, this clean looking guard provides full hub and spoke protection. Compatible only with the Cinema ZX front hub.

The VX2 rear hub guard is a 7075-T6 aluminum guard that replaces the existing non-drive side hardware for a smooth look. Designed to protect your spokes and keep you on your grind. Compatible only with the VX2 cassette hub.

Designed to work on both sides, the CF front hub guard presses directly over existing Cinema hub hardware to protect your hub and spokes on grinds. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable and easily replaceable. Compatible with Cinema 2018 VX2 and Cinema 2018 ZX front hubs.

The Cinema VR (uniVersal Rear) hub guard is injection molded from an ultra-durable and fast sliding nylon composite. Designed to work with as many different rear hub and frame combinations as possible, the VR guard covers the drive side or non-drive side of your rear hub and protects it from grinds. Simply install outside the frame dropout, without replacing any hub hardware and without needing to space out your frame.

The ZX rear hub guard threads directly on the axle, replacing the existing cone hardware. Machined from 7075-T6 aluminum, this clean looking guard provides full hub and spoke protection. Compatible only with the Cinema ZX rear hub.

Cinema FX Rear Freecoaster Hub Guard

Designed for drive-side use only, the DR rear hub guard presses directly over existing Cinema hub hardware to protect your chain, driver and hub shell on grinds. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable and easily replaceable. Compatible with 2018 Cinema VX2 cassette, 2018 Cinema FX freecoaster, 2018 Cinema ZX cassette and Federal V4 freecoaster hubs.

Cinema VX Front Bearing

The VX2 is a high quality, sealed front hub with a super strong 15mm SUJ-2 steel inner axle and a 6061 aluminum hub shell with thick angled flanges to eliminate bearing seat stretch. Combined with the Cinema VX2 front hub guards, this hub can take a serious beating.