Handlebars

Four-piece handlebar designed by Johnny Raekes made from proven heat-treated chromoly tubing with a butted crossbar to reduce weight. 12* Backsweep, 1* Upsweep.

The Foundry bars are our classic, no gimmicks, super tough two-piece bars. These bars feature straight gauge 4130 chromoly steel tubing, and are heat treated for superior strength after welding. Coming in various rises tofit your preference, the Foundry bars all feature a comfortable 12° backsweep and 1° upsweep. The large radius bends increase durability and give these bars their timeless look.

The Helm bars strike the right balance between strength and weight by using internal butting throughout the main tubing and crossbar. This increases thickness and strength where it's needed in the bends, weld points,and the ends of the bars while keeping the tubing thinner in the straight sections. Constructed from 4130 chromoly steel tubing, these bars are also heat treated for superior strength after welding. The Helm bars come in various rises to fit your preference, and have a 12° backsweep,1° upsweep, and 29.5" width.

Coming in at a comfortable 9” even the Kink Grizzly bars are a nice balance of height and width. Like all Kink handlebars the Grizzly bars use only the best 4130 chromoly steel material and our TruTherm post weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends which adds strength where bars need it most.

The Eagle bars are our first ever set of 4-piece bars! Available in multiple heights to fit your preference, all Eagle bars maintain the same width and comfortable sweeps. Made from straight gauge 4130 chromoly steel tubing, combine with our TruTherm post weld heat treatment process, these bars can take a beating. The dimensions and bends used on the Eagle bars give the classic 4-piece design a modern and updated look.

Designed with Nathan’s preferred geometry, and now available in a 4pc design. Nathan himself alternates between riding 2pc and 4pc bars, and thus the Williams bars are available in both, no matter which your preference is. With a classic 4pc shape and design, these bars feature a custom end cap design for a cleaner look. The straight gauge chromoly tubing construction and TruTherm post weld construction ensure these bars are super strong and can withstand Nathan’s insane level of riding.

As the name suggests, the Williams bars are Nathan Williams’ signature handlebars and feature all his preferred geometry. The 9.25” rise is a traditional height, without being either too tall or too short. The unique 1.5-degree upsweep is just slightly up from most traditional bars, and the 11-degree backsweep is slightly less, creating Nathan’s preferred feel. The 13-butted chromoly tubing construction, and TruTherm post weld heat treatment process ensure these bars have no problems standing up to Nathan’s insane level of riding.

The Rex bars are perfect if you are looking for a big pair of bars, but not enormous. Like all Kink handlebars, the Rex bars use only the best 4130 chromoly steel material and our TruTherm post weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends, which adds strength where bars need it most.

Dan Coller’s signature Contender bars are perfect for taller riders, coming in at a comfortable 9.75” rise. The Contender bars are the first set of bars from Kink to offer pre-defined cutting grooves at 0.25” intervals. Coming with a stock 29.5” width, they can easily be cut down to 29”, 28.5”, 28” or 27.5” without breaking out the tape measure. Made from 13-butted chromoly tubing, and our TruTherm post weld heat treatment process, ensures these bars can stand up to all kinds of riding. Being ridden and trusted by Dan Coller daily, can attest to the Contender bars strength.

With a 10” rise and 30” width the Hulk bars are big plain and simple. Like all Kink handlebars the Hulk bars use only the best 4130 chromoly steel material and our TruTherm post weld heat treatment process to ensure maximum strength. The 13-butted tubing design means the bars are thicker in the bends which adds strength where bars need it most.

Super tough straight gauge 100% 4130 chromoly handlebars. The deeply knurled clamping area prevents your bars from slipping so you can keep shredding! Available in 9” and 9.5” rise.

The Crosshair bars are super tough, made from straight gauge 4130 chromoly tubing and available in multiple heights. Deep knurling at the clamping area prevents the bars from slipping, and the four-piece design sports a really classic look.