16 Item(s)

per page
Set Descending Direction

Approved customer account required for pricing information

New
Cinema FX Front Hub

Cinema FX Front Hub

The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the Cinema CF nylon hub guards (included). The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm chromoly inner axle provides plenty of strength for all the grinds you can throw at it.

3 Options
Cinema VX2 Front Hub

Cinema VX2 Front Hub

The VX2 is a high quality, sealed front hub with a super strong 15mm SUJ-2 steel inner axle and a 6061 aluminum hub shell with thick angled flanges to eliminate bearing seat stretch. Combined with the Cinema VX2 front hub guards, this hub can take a serious beating. Now includes 2 hub guards!

2 Options
Cinema VX2 Cassette Hub

Cinema VX2 Cassette Hub

The refined VX2 cassette hub is truly built to last. The 14mm heat treated chromoly male axle and hub guard compatibility ensure this hub will hold up to any peg abuse you can throw at it. This hub also features the SDS driver system, which allows you to switch between right hand drive and left hand drive. Now includes 2 hub guards!

2 Options
Cinema VX3 Cassette Hub

Cinema VX3 Cassette Hub

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.

2 Options
Cinema FX Freecoaster Hub

Cinema FX Freecoaster Hub

The team favorite, FX freecoaster hub. Features KHE based internals, a 9t sealed bearing driver, and a super strong heat treated 14mm axle with 6mm internal hex. Paired with the FX rear hub guard, this hub is a beast! Includes 3 slack adjustment washers for fine tuning. Now includes 2 hub guards!

4 Options
Cinema FX2 Freecoaster Hub

Cinema FX2 Freecoaster Hub

The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9t dual sealed bearing driver with additional bushing, and a super strong heat-treated chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.

4 Options
Fiend Cab Flangeless Front Hub

Fiend Cab Flangeless Front Hub

Fiend Cab Flangeless Front Hub

2 Options
Fiend Cab Freecoaster Hub

Fiend Cab Freecoaster Hub

Fiend Freecoaster Hub

2 Options
Kink Yukon Cassette Hub

Kink Yukon Cassette Hub

The Kink Yukon hub was designed for strength and durability, full stop. The 14mm female axle bolts and over-sized chromoly inner axle can put up with as much grinding and peg use as you can throw at it. We’ve also improved the standard driver design, to help eliminate driver pawl skip. This hub also features the SDS driver system, which means you can easily change it to Left Hand Drive or Right Hand Drive. The Yukon hub is also compatible with the Kink Rear nylon hub guard. Note: 8T drivers for the Yukon hub are sold separately.

3 Options
Kink East-Coaster DTC Freecoaster Hub

Kink East-Coaster DTC Freecoaster Hub

The Kink BMX East-Coaster DTC freecoaster hub is based on the traditional and proven KHE style internals. For a full range of slack options, from small to big, three slack adjustment washers are included. This hub features a tough 14mm heat-treated chromoly axle, and a special angular contact bearing for additional side load support. The custom aluminum hardware cone is also compatible with the Kink Rear nylon hub guard. Our new Dual Threaded Clutch (DTC) system allows both LHD or RHD drivers to be installed, without opening the hub or replacing the clutch. Now you can simply replace the driver to change drive sides.

2 Options
Merritt Non-Stop Front Hub

Merritt Non-Stop Front Hub

Merritt Non-Stop Front Hub

2 Options
Mission Radar Front Hub

Mission Radar Front Hub

The Mission Radar is an affordable front hub with two precision sealed bearings and a hollow heat-treated chromoly inner axle. The slim 6061-T6 aluminum hub shell has a classic look, and is available in 36-hole only. The bolt-in axle design works great with pegs or without.

2 Options
New
Mission Engage Cassette Hub

Mission Engage Cassette Hub

The Mission Engage is an affordable cassette hub with five precision sealed bearings and a tough heat-treated chromoly straight axle. The driver is a 3-bearing, 3-pawl design for added durability and consistent engagement. The straight axle design assures plenty of length for hub guards and all peg types.

1 Options
Mission React Cassette Hub

Mission React Cassette Hub

An affordable and reliable rear cassette hub! Featuring a 9t, 4 pawl driver and 4 precision sealed bearings. The tough chromoly straight axle tightens down with 17mm chromoly axle nuts.

1 Options
Mission Deploy Freecoaster Hub

Mission Deploy Freecoaster Hub

The Mission Deploy hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left and ride hand drive options, the Deploy hub has you covered.

4 Options

16 Item(s)

per page
Set Descending Direction