Triple 8 Sweatsaver Liner

Once the interior gets smelly and trashed, replace it with a new one. This replacement liner is for use only in non-certified full cut helmets.

Pro-Tec Bucky Plus Replacement Liner

Pro-Tec Classic Replacement Pads

Pro-Tec Classic Plus Replacement Liner

Premium grade 14 gauge stainless steel spokes available in the appropriate BMX lengths, and in a ton of awesome colors!

A pair of lightweight 17mm axle nuts. Available in 3/8” and 14mm in various colors!

Allows you to ride 3/8” axles in a 14mm fork or frame. Available in 4mm

Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and allen key slot. This fork cap installs with a common 6mm allen wrench.

Cranks arm pinch bolts, fits Mission cranks and others (2 bolts)

Replacement spindle bolts, fits Mission cranks and many others, M8*P1.0 thread.

Mission Replacement Spindle 8 Spline 19mm or 48 Spline 19mm

Replacement nylon sleeve for the Mission Targa peg.

Mission BB Cups

Assorted bottom bracket spindle spacers for fine tuning crank arm offset, 2pcs x 0.6mm, 2pcs x 1.5mm, 2pcs x 3mm.

Includes 2 precision sealed bearings, aluminum cups, high density plastic cone spacers, center tube spacer, sprocket adapter, plenty of adjustment washers, 2 spindle bolts, and an 8 spline 19mm forged chromoly spindle.

Includes 2 precision sealed Mid size bearings, high density plastic cone spacers, center tube spacer, sprocket adapter, and plenty of adjustment washers. Available in 19mm or 22mm.

Push pin type half-link connector. Compatible with ⅛” chains only.

Clip type master link, works on ⅛” chains only.

Replacement stem bolts that fit most current BMX stem. Sold in packs of 6, featuring a 6mm allen key hex and standard M8*P1.25mm thread.

Replacement integrated campy spec headset bearing, fits most integrated headsets and frames.

Includes 2mm, 5mm and 7mm aluminum headset spacers for fine tuning your stem height.

Our standard 1 ⅛” headset for bikes without an integrated head tube. Tough chromoly cups and caged bearings make this a super durable headset. Comes with a steel star nut and bolt to keep everything tight!

Mission Conversion Headset

Aluminum cable ends designed to keep the end of your cable from fraying.

Traditional bolt style straddle cable hanger.

A quality 265mm long straddle cable with ball lugs on both ends.

Merritt Mid BB

Merritt High Top Headset CAP ONLY!

Merritt High Top Headset

Merritt Low Top Headset

Kool Stop BMX Brake Pads

Kool Stop Supra 2 Brake Pads

Kool Stop Eagle 2 Brake Pads

Kenda Tube

KMC Half Link

Kink Spoke Wrench Carabiner

The Kink Drift pegs comprise of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. Drift pegs have a 1.5” outer diameter and come in both 4” and 4.4” lengths. Replacement sleeves are also sold separately.

Kink Mid BB Cone Kit

Kink bottom bracket kits include precision sealed bearings, machined dust cover cones, and all the spacers needed for perfect crank and chain alignment. The center tube spacer is a standard 51mm width so no additional internal spacers are needed, and on the off chance your frame requires a 48mm center spacer, it can be cut down using the cut guide machined into the spacer.

The Senec pedals have no bearings, which means simplicity and durability. Using a propriety pedal body material and grease, the pedal bodies spin directly on the spindle acting as a bushing itself and leaves no small parts left to come loose or break. In addition to this new bearing-less system, the Senec pedals use a massive 17mm forged hollow spindle. This creates a huge increase in strength over traditional pedal spindles, while keeping about the same weight. The pedal bodies are also universal, which means if you need to buy a replacement body it can be used on either the left or right side and are very affordable.

The Master Clamp features a custom bolt design that fits both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use you’ll still only need one allen key to adjust the entire seating setup. Beyond the bolt the seat clamp is made from industry standard 6061-T6 aluminum and features a slim low profile design.

Featuring two precision sealed bearings, the Kink Integrated II headset provides long bearing life and super smooth function. The headset also includes a tall CNC machined dust cover cap, and three assorted size color matched stack spacers to get the perfect stem height. This headset fits all integrated campy style frames.

Kink Desist brakes are fully forged from 7075-T6 aluminum for ultimate stiffness. The unique cable pivots and straddle cable system create a smoother and more powerful pull. A low stack spring and cap design also provide extra clearance for drivetrains. This brakeset also includes the legendary Kool-Stop brake pads for plenty of stopping power. Note: Front brake upgrade kit sold separately.

Kink rim strips are made from a heavy duty yet flexible PVC material and come in an extra wide 32mm width for better tube protection. These rim strips provide full coverage of the rim from any burs or protruding spokes and nipples.

Fiend Compression Bolt

Fiend Belmont Peg

Fiend Mid BB