Brands

Traditional aesthetics with modern design and affordances define the Kink Feral frame. Built with trails or park riding in mind, it can also handle street just as well for riders seeking something more traditional and stable. The mellower headtube angle keeps the front end solid, while the 13.5-13.75” chainstay length allows for adjustability and a longer wheelbase for added stability. The small toptube diameter, tapered seatstays and chainstays, and their domed end caps give the frame its clean and traditional look. The large custom-designed CNC seatstay and chainstay bridges not only look great but also provide extra stiffness to the rear triangle. The frame comes standard with an integrated seatpost clamp, integrated chain tensioners, and removable brake lugs for those looking to run brakes (brake mount kit sold separately).

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

A graphic tee printed with water-based ink for soft feel. Tailored fit with longer torso.

The Process IC Fork features fully heat-treated chromoly tubing throughout with a 1pc. machined steerer tube with integrated bearing race for use with all 45×45 Integrated headsets and a 7000 series alloy compression bolt. The 6mm thick investment cast drop out and lower leg junction provide the ultimate strength while maintaining a clean look and the 20mm offset helps keep the front wheel under the rider for a more responsive steering. Fits 3/8″(10mm) axles only.

Forks take a lot of abuse and we all know the importance of one that is well constructed. The Invest fork features fully heat-treated Chromoly tubing throughout with a 1pc. machined 174.5mm steerer tube with an integrated bearing race for use with all 45×45 Integrated headsets and a 7000 series alloy compression bolt. The 6mm thick investment cast dropouts with 3/8"(10mm) axle slots and lower leg junction provide the ultimate strength while maintaining a clean look. Fits tires up to 2.30".

The Barge LS has been redesigned. We revamped the old pattern for a fresh new shoe. Adding a hefty armoured collar and raising the heel has made all the difference in reconstructing the Barge LS into a slimmer and more narrow shoe design.

As the name suggests, the Williams bars are Nathan Williams signature handlebars and feature all his preferred geometry. The 9.25" rise is a traditional height, without being either too tall or too short. The unique 1.5-degree upsweep is just slightly up from most traditional bars, and the 11-degree backsweep is slightly less, creating Nathan's preferred feel. The 13-butted chromoly tubing construction, and TruTherm post weld heat treatment process ensure these bars have no problems standing up to Nathan's insane level of riding.

The Kink Crosscut is a modern-day beast of a frame. The double-butted toptube and downtube with both upper and lower gussets will stand up to the hardest riding, and the short 12.5" chainstay length and quick 75.5" headtube angle make this frame nice and nimble. The generous 9.25" standover height gives the frame a clean and traditional look, but with the aforementioned modern-day geometry. The all new investment cast chainstay yoke enables you to ride any modern tire size up to 2.55" and run your choice of 25t or 28t sprocket. This frame also comes standard with an integrated seat post clamp, integrated chain tensioners, and removeable brake mounts.

The Williams frame is Nathan Williams first signature frame from Kink and features modern street geometry while retaining a classic look. Despite the classic look though, the frame features several subtle details that should not be overlooked. The steeper 75.5-degree headtube is responsive, and the short 12.75"chainstay length makes the frame nimble without compromising on tire clearance; fitting up to 2.5" tires. The double butted toptube and downtube with gussets on both, ensure plenty of strength in the front end while the chainstay and seatstay bridge designs allot for generous tire clearance while adding as much stiffness as possible. Nathan's frame of course comes standard with integrated seat post clamp, integrated chain tensioners, and removable brake mounts. Additional details like the custom seatstay bridge badge inlay, and interior dropout knurling round out both the good looks and serious functionality of the Williams frame.

Kink Stoic forks put the focus on strength first and foremost, while maintaining a great aesthetic and super modern geometry. Stoic forks come in two different offset options, 15mm or 20mm, for a quick and responsive feel. The custom formed tapered and ovalized fork legs create additional hub guard clearance, while providing a ton of stiffness. Internally butted tubing adds all the strength where it's needed, while keeping everything at a reasonable weight, both in the fork legs and steerer tube. The investment cast fork leg ends feature clean debossed K-Brick logos in the back and a generous radius in the front for plenty of peg clearance.

The Kink Vogue forks check all the boxes; strength, feel, and aesthetics. The fork legs feature a custom oval tube profile, welded up to a fully CNC'd steerer tube with internal butting to add strength where it's needed. The investment cast dropouts are one single piece making them super strong and feature interior knurling to keep your wheel and plastic hub guards in place. The 25mm offset gives a responsive feel, without being too short or too raked out. Kink Vogue forks also feature steerer tube cut lines for those riders wanting to trim down

Spruce up your bike with some fresh Mission stickers. Or stick a few in your locker, on the local ramps, or on a parent's car!

Designed by Lewis Mills and Constructed with 100% chromoly tubing throughout. Features includes a heat-treated Mid bottom bracket shell and 5" integrated headset head tube ( tapped for gyro tabs,) externally gusseted double-butted seat tube with integrated seat post clamp, tapered seat stays, ovalized chain stays, and 8mm thick dropouts with integrated chain tensioners. Available with our new flush brake mount system. Brake hardware sold separately.

Fiend Mills Sticker Pack

All street, all day. The Royale frame features progressive geometry throughout the design with premium grade materials and craftsmanship to back them up. A 76-degree headtube angle and 12.5" chainstay length make the Royale frame compact and responsive, ideal for modern day street and plaza riding. 100% 4130 chromoly tubing and both toptube and downtube gussets provide a ton of strength and stiffness. Custom interior chainstay forming provides tire clearance up to 2.55" and the seatstay bridge features a brass badge inlay. This frame comes standard with an integrated seat post clamp, integrated chain tensioners, and removable brake mount lugs for those looking to install brakes.

*Brake mounts not included!*

Assorted Kink BMX sticker pack (actual stickers may vary)

Keep your style on point with this tried-and-true fold-over beanie. The slightly oversized fit is perfect for our long haired friends and for extra ear coverage, on those colder nights.

Designed with Nathan's preferred geometry, and now available in a 4pc design. Nathan himself alternates between riding 2pc and 4pc bars, and thus the Williams bars are available in both, no matter which your preference is. With a classic 4pc shape and design, these bars feature a custom end cap design for a cleaner look. The straight gauge chromoly tubing construction and TruTherm post weld construction ensure these bars are super strong and can withstand Nathan's insane level of riding.

The Foundry bars are our classic, no gimmicks, super tough two-piece bars. These bars feature straight gauge 4130 chromoly steel tubing, and are heat treated for superior strength after welding. Coming in various rises to fit your preference, the Foundry bars all feature a comfortable 12" backsweep and 1" upsweep. The large radius bends increase durability and give these bars their timeless look.

The Helm bars strike the right balance between strength and weight by using internal butting throughout the main tubing and crossbar. This increases thickness and strength where it's needed in the bends, weld points,and the ends of the bars while keeping the tubing thinner in the straight sections. Constructed from 4130 chromoly steel tubing, these bars are also heat treated for superior strength after welding. The Helm bars come in various rises to fit your preference, and have a 12" backsweep,1" upsweep, and 29", 29.5", 29.5", and 30" widths.

Pack of three die-cut magnets (4" x 4.25", 4" x 2.2", 4" x 3.8"). Perfect for representing on your fridge, locker, toolbox, or any other metal surface.

The Kink Crest forks are packed with new features making them
amazingly strong and great looking too. The flared crown design
covers the lower headset bearing while meeting flush with the
headtube for a seamless look. Dome shaped end caps are slotted
first allowing the dropouts to be plugged into the fork legs before
welding, adding both strength and stiffness. The dropout shape has also been refined for optimal peg clearance and a comfortable 30mm offset. Crest forks are fully post weld heat treated, and include our 7075-T6 aluminum fork cap bolt.