Brands

Take control of your front end with the Mills FL Stem from FIEND. Designed for precision and strength, this 50mm front load stem is built to keep your bars locked in and your ride dialed.

CNC machined from 6mm thick 6061 aluminum with offset teeth for better chain alignment. The 26t size is compatible with the Havoc Sprocket Guard(sold separately) Includes 22mm spindle adaptor

Get the height of a topload stem, with the look of a frontload stem. The Cinema Projector stem combines the old with the new and has a classic yet modern look. Featuring a 50mm reach and 25mm rise, this stem should feel right at home coming from most traditional topload stems. The recessed fork cap bolt design means this stem will still work on all standard fork steerer tube lengths as well. Six oversized Allen key bolts provide plenty of strength and torque to keep your bars in place

Add a bit of class to your bike with the Cinema Blocked seat. The single-panel faux leather cover features color matched stitching patterns and embroidered Cinema logos. The patented Stealth technology allows for a seamless cover resulting in a truly clean and classy look.

Featuring the latest Stealth system design, the Cinema Stealth Medium (200mm) seat post is as simple and clean as it gets. The standard 25.4mm diameter fits most modern BMX frames, and the 3D forged 6061-T6 aluminum creates a super strong design. Works with both Stealth and traditional Pivotal seats. 

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.

Kink bottom bracket kits include precision sealed bearings, machined dust cover cones, and all the spacers needed for perfect crank and chain alignment. The center tube spacer is a standard 51mm width so no additional internal spacers are needed, and on the off chance your frame requires a 48mm center spacer, it can be cut down using the cut guide machined into the spacer.

The Lightest barends are ultra simple and sleek end-cap style barends, that utilize two internal grub screws to secure them into your bars. Over the years they have gone through several refinements and revisions, each improving on the previous versions. Machined from 7075-T6 aluminum, they are build to last and will protect both you and your grips for years to come.

The Ideal bar ends use a simple and lightweight three piece wedge design that install with a convenient 6mm Allen key. The 31mm diameter fully covers the grip while the 7075-T6 aluminum material means no more broken barends!

The Kink fork cap bolt aims to make things just a little more convenient, and is keyed for both a 6mm allen key and 3/8th's ratchet drive. The cap itself is CNC machined from high grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a large majority of other forks as well.

The Cinema Format sprocket features a clean, solid design with laser etched graphics. Made from full CNC machined 6.35mm (1/4") thick 6061-T6 aluminum providing all the strength you need. Featuring offset 1/8th teeth provides improved chain alignment on all set ups for a smoother ride.

Kink Survival Spoke Wrench 

Made from super stiff forged aluminum. Features a 2 finger design lever for comfort and a hinged clamp for easy installation and removal. Available in multiple colors!

Aluminum cable ends designed to keep the end of your cable from fraying. Sold in packs of five.

Replacement integrated campy spec headset bearing, fits most integrated headsets and frames.

An affordable teflon coated 1/8" chain. Features factory installed master link and half link. Available in assorted colors for a custom look!

KMC Pintle Chain Solid Pin

KMC 610HX 3/32" Chain

Allows you to ride 3/8" axles in a 14mm fork or frame. Available in 4mm width.

Mission axle nuts for 3/8" axles. Aluminum or steel construction. Wide shape with flange for strip-resistant, secure wheel placement. 

The Kink Track stem is a modern take on the classic frontload design. This fully CNC machined stem features a slightly contoured body profile, relieved outer walls to shave off some of the weight, an engraved KINK logo in the cap, and a recessed fork cap bolt design for a clean look. Instead of tightening the stem cap down in the traditional star pattern, the top two bolts tighten down fully first, giving the top of the stem a totally clean and flush look, before tightening the lower two bolts down. Internally machined grooves inside the stem cap and the oversized bolts provide plenty of clamping power to ensure your bars stay in their place.

Lightweight aluminum axle nuts with a 17mm hex size. Available for 3/8ths and 14mm axle sizes, sold in pairs.

Keep your style on point with this tried-and-true fold-over beanie. The slightly oversized fit is perfect for our long haired friends and for extra ear coverage, on those colder nights.

The Cinema Aspect headset is a high quality and super versatile headset. The stackable cap design can be configured in several different ways, ranging from a totally slammed 4mm cap height, up to a full height 27mm cap, with a clean and contoured look. Whether you like to cut your fork down as short as possible, or not cut them at all, this headset has you covered. Featuring two precision sealed campy spec integrated bearings, the Aspect headset provides smooth long lasting bearing life.

Nathan Williams signature seat features a clean and classy three-panel design with corduroy cover materials. The color-matched stitching is complemented by a woven patch on the rear panel and Williams signature tag on the side. The Stealth system installs with a 5mm allen key and allows for a clean looking seat without the need for a slotted top patch like traditional Pivotal systems.

The Mission Pace hub gives you a chance to upgrade to a freecoaster without breaking the bank. With sealed bearings throughout, adjustable slack, heat-treated chromoly axle, and left and right-hand drive options, the Pace hub has you covered.

The Mission Bond is an affordable front hub with two precision sealed bearings and a heat-treated chromoly inner axle. The slim 6061-T6 aluminum hub shell has a classic look and is available in 36-hole only. The 3/8" bolt-in axle design works great with pegs or without.

One-piece sprocket with integrated guard. CNC machined from 6mm thick 6061 aluminum with offset teeth for better chain alignment. Includes 22mm spindle adaptor.

The updated Kink Desist II brakes are forged and CNC machined for superior stiffness. The unique cable pivot design and straddle cable system create a smoother and more powerful pull. Updated cable pivots are locked on with c-clips and the new oversized bushings keep the coil springs centered for maximum tire clearance. This brake set also includes legendary Kool-Stop pads for plenty of stopping power. All necessary hardware for front, rear, or dual cable gyro installations comes included.

The Kink Gavel topload stem is both tough and technical. This CNC machined stem features a fully chamfered body, relieved outer walls to shave off some of the weight, an engraved KINK logo in the cap, and a recessed fork cap bolt design for a clean look. A wide 50mm clamping area, along with machined grooves inside the cap, give this stem a ton of clamping power. In addition, the oversized and hardened bolts ensure plenty of torque to keep your bars in place.

Garrett's v4 stem is CNC'ed from 6061 aluminum with a 48mm reach and features an externally machined stem body and full internal bar surface contact body and front cap for improved bar grip, a 8.25mm rise, a recessed fork bolt area for a clean look, solid chromoly stem bolts for strength and an etched Fiend logo. Weight: 11.4ozs.

This long lasting, cinnamon scented, air freshener is sure to keep your ride smelling nice, even when you're not.

The Mission Locator sprocket features a simple but solid construction with laser etched graphics. This sprocket is machined from 5mm thick 6061-T6 aluminum and includes adapters for 19mm and 22mm spindle sizes.

The Ransom stem is CNC'ed from 6061 aluminum with a 50mm reach with a wide body for added clamping power. Featuring an externally machined stem body and full internal bar surface contact body and front cap for improved bar grip, a 26mm rise, a recessed fork bolt area for a clean look, solid chromoly stem bolts for strength and an etched Fiend logo. 

Crafted from a premium 70% combed ring-spun cotton and 30% recycled polyester blend, this zip-up sweatshirt delivers soft, dependable comfort. The relaxed, side-seamed fit creates a clean silhouette, while the drawcord-free hood keeps the look minimal. Finished with on-seam side pockets for clean, functional storage.