Brands

Featuring the latest Stealth system design, the Cinema Stealth Large (330mm) seat post is as simple and clean as it gets. The standard 25.4mm diameter fits all BMX frames, and the 3D forged 6061-T6 aluminum creates a super strong design. Works with both Stealth and traditional Pivotal seats.

Take control of your front end with the Mills FL Stem from FIEND. Designed for precision and strength, this 50mm front load stem is built to keep your bars locked in and your ride dialed.

Built for cruising, the Kink Drifter 26” is designed for all the times when a traditional 20” BMX bike might not be so practical. Whether it’s riding to school or work, out with your kids, or even ripping around your local skatepark, the Drifter can handle it all. Built with all standard BMX components, the Drifter is super low maintenance and can be upgraded with any standard BMX components; even pegs and a gyro. So go rip a skid, lock into a wheelie, or just get out for a comfortable cruise on the new Fern Green Drifter. 

Replacement decal kit for the Kink Prophet frame.

Featuring the latest Stealth system design, the Cinema Stealth Medium (200mm) seat post is as simple and clean as it gets. The standard 25.4mm diameter fits most modern BMX frames, and the 3D forged 6061-T6 aluminum creates a super strong design. Works with both Stealth and traditional Pivotal seats. 

Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI's superior rubber material. The flangeless design features a generous 160mm (6.3") width and super comfortable 30.5mm (1.2") diameter. Thin mushroom style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip, while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug style barends.

Knurled 6061 aluminum valve caps for a little touch of swag.

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box.

The Kink Samurai grips as the name suggests were inspired by the amazing craftsmanship used in Japanese Samurai swords. Beautiful design quality craftsmanship and the best materials. With this all in mind the Samurai grips are manufactured by ODI in the USA using the propriety ODI™ rubber compound. The grip pattern design is inspired by Samurai sword handles, creating a superior gripping surface. A perfectly paired set of plug style bar ends are included.

Kink Survival Spoke Wrench 

CNC machined from 6mm thick 6061 aluminum with offset teeth for better chain alignment. Includes 19mm & 22mm spindle adaptors. Compatible with the replaceable Havoc Guard, sold separately.

Your Standard Single Speed Chain

The Kink Pillar cranks use a unique one piece forged backplate that tie together the pedal and spindle bosses, while acting as an extremely stiff backbone to each crank arm. This design eliminates several weak points found in traditional tubular cranks, and increases the overall strength without adding weight. The Pillar cranks also feature a two piece hydraulically pressed spindle to arm design, and a heat-treated hollow chromoly spindle.

Replacement spindle for the brace cranks.

Replacement spindle bolt for the brace cranks.

Topload design stem with a 6061 aluminum cast body and cold forged cap for added strength. Recessed sides and front make the Control stem simple, sleek and lightweight. The transitional 50mm reach and generous 32mm rise make for a comfortable ride.

Clip type master link, works on 1/8" Mission chains only.

Push pin type half-link connector. Compatible with Mission 1/8" chains only.

An updated, flangeless version of the classic ODI Longneck. Mushroom rib pattern with ODI's "Soft" compound in a generous 160mm length. Open-end design to accomodate push-in plugs.

8 spline, cold forged, 19mm spindle. Works with most 8 spline OEM cranks. Includes spindle bolts.

48 spline, cold forged, 19mm spindle. Works with most 48 spline OEM cranks. Includes spindle bolts.

All street, all day. The Royale frame features progressive geometry throughout the design with premium grade materials and craftsmanship to back them up. A 76-degree headtube angle and 12.5" chainstay length make the Royale frame compact and responsive, ideal for modern day street and plaza riding. 100% 4130 chromoly tubing and both toptube and downtube gussets provide a ton of strength and stiffness. Custom interior chainstay forming provides tire clearance up to 2.55" and the seatstay bridge features a brass badge inlay. This frame comes standard with an integrated seat post clamp, integrated chain tensioners, and removable brake mount lugs for those looking to install brakes.

*Brake mounts not included!*

Garrett's v4 stem is CNC'ed from 6061 aluminum with a 48mm reach and features an externally machined stem body and full internal bar surface contact body and front cap for improved bar grip, a 8.25mm rise, a recessed fork bolt area for a clean look, solid chromoly stem bolts for strength and an etched Fiend logo. Weight: 11.4ozs.

Sleek simplicity describes the Kink Prophet frame. A no-frills,
straight to the point, super-strong frame, that features all the
modern specs and looks great while doing it. The modern but not
extreme geometry makes this frame a stable and easy ride for
just about anyone, and the custom designed gussets and stay
bridges provide additional strength and stiffness. This frame
comes standard with an integrated seat post clamp, integrated
chain tensioners, and removable brake lugs for those looking to
install brakes (mount kit sold separately).

The Ransom stem is CNC'ed from 6061 aluminum with a 50mm reach with a wide body for added clamping power. Featuring an externally machined stem body and full internal bar surface contact body and front cap for improved bar grip, a 26mm rise, a recessed fork bolt area for a clean look, solid chromoly stem bolts for strength and an etched Fiend logo.