Components

Take control of your front end with the Mills FL Stem from FIEND. Designed for precision and strength, this 50mm front load stem is built to keep your bars locked in and your ride dialed.

The Ransom stem is CNC'ed from 6061 aluminum with a 50mm reach with a wide body for added clamping power. Featuring an externally machined stem body and full internal bar surface contact body and front cap for improved bar grip, a 26mm rise, a recessed fork bolt area for a clean look, solid chromoly stem bolts for strength and an etched Fiend logo. 

The Cinema Sync half-link chain offers complete adjustability without needing an additional link and the curved side plates reduce the chances of a broken chain caused by links being caught during missed grinds. Forged pins further increase the chain's strength and the Teflon coating reduces friction and wear on both the chain and sprocket. Debossed Cinema logos on each link finish off the overall design and the pre-inserted connector pin makes for easy installation. Compatible with 8t drivers and up.

Next time you go down and you are laying on the ground in pain, just glance up at your seat and remember this quote; you have to die a few times before you can really live! The heavy-duty canvas material provides tear resistance and features clean and crisp custom sublimated artwork. This seat also features extra thick foam padding and Stealth system for easy installation with a 5mm allen key.

Cinema Focus grips are proudly manufactured in the USA by none other than ODI, using ODI's superior rubber material. The flangeless design features a generous 160mm (6.3") width and super comfortable 30.5mm (1.2") diameter. Thin mushroom style ribs fold over to conform to your hand, making these grips super comfortable and grippy. The subtle offset octagonal profiles provide even more grip, while still being ultra-thin and soft to give that perfect feel. Sold in pairs and include plug style barends.

Knurled 6061 aluminum valve caps for a little touch of swag.

Kink’s One Piece Cable system incorporates all the great features found in the DX linear cable, and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop. Works best with modern frames using a 245mm cable stop to mount distance.

The Fiend Tall integrated headset includes 2 precision sealed cartridge bearings, an aluminum compression ring, 15mm tall alloy dust cover with an internal O-ring and 2 laser-etched Fiend logos. We've also included 2 color matched stack washers for bar rise adjustment.

Features a nylon composite concave body with 12 pins per side and micro-knurling for added maximum grip and a 9/16" chromoly spindle with a 6mm broach for ease of installation and removal.

Kink Survival Spoke Wrench 

Your Standard Single Speed Chain

The Kink Pillar cranks use a unique one piece forged backplate that tie together the pedal and spindle bosses, while acting as an extremely stiff backbone to each crank arm. This design eliminates several weak points found in traditional tubular cranks, and increases the overall strength without adding weight. The Pillar cranks also feature a two piece hydraulically pressed spindle to arm design, and a heat-treated hollow chromoly spindle.

Replacement spindle for the brace cranks.

Replacement spindle bolt for the brace cranks.

Frame headtube badge, includes 3M adhesive, fits most frames.

A high quality integrated headset at an affordable price! Includes 2 campy spec sealed bearings and a 15mm tall dust cap for a seamless look.

Topload design stem with a 6061 aluminum cast body and cold forged cap for added strength. Recessed sides and front make the Control stem simple, sleek and lightweight. The transitional 50mm reach and generous 32mm rise make for a comfortable ride.

An affordable teflon coated 1/8" chain. Features factory installed master link and half link. Available in assorted colors for a custom look!

A teflon coated 510 chain with heat-treated pins and thicker side plates, our 510 chain is built to last. Features a factory installed half link and master link. Available in assorted colors for a custom look!

Our teflon coated half link chain is designed to dial in the chain length on any bike. Rounded side plates allow for use on 8t drivers and up. Available in assorted colors for a custom look!

Clip type master link, works on 1/8" Mission chains only.

Push pin type half-link connector. Compatible with Mission 1/8" chains only.

The super popular Impulse pedals feature 12 traction pins per side and a knurled concave body for superior grip. They're available in a constantly expanding array of colors to keep your bike looking fresh and swaggy!

An updated, flangeless version of the classic ODI Longneck. Mushroom rib pattern with ODI's "Soft" compound in a generous 160mm length. Open-end design to accomodate push-in plugs.

48 spline, cold forged, 19mm spindle. Works with most 48 spline OEM cranks. Includes spindle bolts.

Mission axle nuts for 3/8" axles. Aluminum or steel construction. Wide shape with flange for strip-resistant, secure wheel placement. 

Mission axle nuts for 14mm axles. Aluminum or steel construction. Wide shape with flange for strip-resistant, secure wheel placement. 

The 444 rim is a double wall pinned rim design with a strong and stiff two chamber profile. Get rolling at an affordable price while keeping your wheels looking fresh with the assorted color options. The 444 rim also comes with a rim strip included.

Lewis Mills signature Pivotal seat with 3 panel top and custom Pivotal access patch. For use with Pivotal seat posts only.

One-piece sprocket with integrated guard. CNC machined from 6mm thick 6061 aluminum with offset teeth for better chain alignment. Includes 22mm spindle adaptor.

Garrett's v4 stem is CNC'ed from 6061 aluminum with a 48mm reach and features an externally machined stem body and full internal bar surface contact body and front cap for improved bar grip, a 8.25mm rise, a recessed fork bolt area for a clean look, solid chromoly stem bolts for strength and an etched Fiend logo. Weight: 11.4ozs.

The 444 freecoaster wheel gets you the biggest bang for your buck. Featuring our tough double wall 444 rim, this wheel is 3-cross laced to our fully sealed Pilot freecoaster hub. The hub features a 14mm chromoly axle and adjustable slack to fit your riding preference.This wheel also comes with a Cinema rim strip and Cinema hub guards included!

KMC Pintle Chain Hollow Pin