Components

Get the height of a topload stem, with the look of a frontload stem. The Cinema Projector stem combines the old with the new and has a classic yet modern look. Featuring a 50mm reach and 25mm rise, this stem should feel right at home coming from most traditional topload stems. The recessed fork cap bolt design means this stem will still work on all standard fork steerer tube lengths as well. Six oversized Allen key bolts provide plenty of strength and torque to keep your bars in place

The Martinez stem is inspired by classic looking top load stems, with key improvements in strength and geometry. A 48mm reach gives a responsive feel, while the standard 22mm rise can be reduced to just 8mm by inverting the stem. Six oversized allen key bolts provide plenty of strength and torque and give the stem a classic well-balanced look and feel. Beveled edges and the tapered body profile give the stem a classic yet unique look. Corey Martinez tested and approved

The Williams tire combines the best of both worlds, with a smooth continuous centerline tread that rolls super-fast and super grippy micro-knurling across the side treads. The 2.5” width adds stability and softens hard landings, while still fitting in most modern frames. Nathan Williams tested and approved.

The FPS tire features a fast, grippy, low profile tread design with a knurled surface for added traction. The tread surface extends down the side walls, providing full tread contact even on the lowest carves. A low profile and minimal tread pattern keeps rolling resistance low as well. The 2.5” width adds stability and softens hard landings, and still fits modern frames.

The Desist II brake kit includes the Kink Desist II brakes with Kool-Stop Supra 2 brake pads, Kink Restrain II brake lever, Kink Linear brake cable, and a Kink velcro cable tie. This kit includes everything you need for a full brake setup.

The Restrain II lever refines the original design resulting in an even cleaner look and adding more functionality. It is construcked from a fully forged aluminum lever, body, and bracket to maximize strength and stiffness. It features a low profile, finger friendly design as well as an ergonomically designed lever for added comfort in bith 1 finger and 2 finer positions. Over-sized hinge joints and pins increase strength and prevent cracks or breaks from over-tightening. The new barrel adjuster adds adjustablity and compatibility for any brake setup, both straight cable or gyro. A unique hidden cable slot design means this lever looks great whether it's installed for front or rear brakes.

CNC Machined from 6061-T6 Aluminum<br>
Fits with Most Popular Stems<br>
Weight: 0.4oz

The Kink Track stem is a modern take on the classic frontload design. This fully CNC machined stem features a slightly contoured body profile, relieved outer walls to shave off some of the weight, an engraved KINK logo in the cap, and a recessed fork cap bolt design for a clean look. Instead of tightening the stem cap down in the traditional star pattern, the top two bolts tighten down fully first, giving the top of the stem a totally clean and flush look, before tightening the lower two bolts down. Internally machined grooves inside the stem cap and the oversized bolts provide plenty of clamping power to ensure your bars stay in their place.

Kink Pivotal seat posts are made from a single 3D forged piece of 6061-T6 aluminum, for a clean and simple look. Available in assorted lengths and colors, the Pivotal seat post fits all Pivotal style seats available on the market. All Kink Pivotal seat posts are the standard 25.4mm diameter and fit all BMX frames.

NEW Updated Design! Leap frogging off the original Pivotal seat system, the Stealth system offers a way to install your seat without fishing an allen key through the top patch. With the Stealth system, the need for a patch and slot on the seat is eliminated and the anchoring seat bolt can be threaded from the bottom using a Stealth seat post. Kink Stealth seat posts are made from a single 3D forged piece of 6061-T6 aluminum and are available in assorted lengths.

Note: You can also use traditional Pivotal seats with Stealth seat posts.

Frame headtube badge, includes 3M adhesive, fits most frames

The Lightest barends are ultra simple and sleek end-cap style barends, that utilize two internal grub screws to secure them into your bars. Over the years they have gone through several refinements and revisions, each improving on the previous versions. Machined from 7075-T6 aluminum, they are build to last and will protect both you and your grips for years to come.

The Kink fork cap bolt aims to make things just a little more convenient, and is keyed for both a 6mm allen key and 3/8″ ratchet drive. The cap itself is CNC machined from high grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a large majority of other forks as well.

The Kink Sever tires feature a simple, yet stylish and effective low profile tread pattern that rolls fast while providing a ton of grip. The entire outer tread surface is micro-knurled which adds additional traction, fresh out of the box. The 2.4" tire width and resilient rubber compound help soften hard landings for both the rider and the rims. Increased thickness in the side wall areas helps to prevent flats, and improves stability even when running lower tire pressures.

The Kink Eastman full guard sprocket was designed to take a beating and it's built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets and the guard offset accommodates all chain widths which give the Eastman sprocket maximum compatibility. It's technical design creates a clean and symmetric aesthetic and provides massive strength where it's needed. Two rotation positions extend the life of the Eastman's built-in guard even further.